Operation steps for adding electrodes

Operation steps for adding electrodes

1. Hang the new electrode above the electrode to be connected and align it with the electrode hole. Slowly drop it vertically to avoid damaging the electrode hole and joint thread (see Figure 7).

2. Use force to rotate the new electrode with a torque ring, and at this time, the spiral hook will rotate and descend together with the electrode until the end faces of the two electrodes come into contact (see Figure 8).

3. Lock the electrode (see Figure 9) with a torque handle and appropriate torque force (see Table 1).

Suggested locking torque table: (Table 1)